İş Mili Alarmı

Tanım

İş mili sistemi anormallikleri için alarm.

Frontmatter içindeki tanımı kurulum, işleme ve kontrol için ortak anlam olarak kullanın.

Formül / Kural

• Spindle alarms are usually judged by load, temperature, lubrication, inverter, or orientation state.
• Do not keep restarting the spindle until the thermal and lubrication condition is confirmed.

Tipik aralık

• Trend spindle load, warm-up time, and lubrication status before the alarm becomes frequent.
• A cold-start alarm and a hot-running alarm usually point to different root causes.

Saha senaryoları

• Check spindle chiller, lubrication, and orientation state when alarms appear after warm-up.
• Compare tool balance and holder condition when the alarm only appears at high RPM.

Yaygın hatalar / Sorun giderme

• If the alarm appears after tool change, inspect holder balance, drawbar force, and taper cleanliness.
• If the spindle trips only under cutting load, compare commanded power with machine capability and chip evacuation.

İlgili araçlar

• Alarm Diagnostics
• Vfd Spindle Tuning