Wahre Position

Definition

Geometrische Toleranz zur Kontrolle der Merkmalslage relativ zu Bezügen.

Die Definition im Frontmatter dient als verbindliche Bedeutung für Rüsten, Bearbeitung und Prüfung.

Formel / Regel

• For a 2D hole-center check, a common calculation is TP = 2 × sqrt((ΔX)^2 + (ΔY)^2) in the drawing unit.
• Evaluate true position against the active datum structure, not against free-state coordinates.

Typischer Bereich

• Review the tolerance as a diametrical zone and confirm whether MMC/LMC modifiers change the effective limit.
• Check X/Y drift together; a single-axis result can look acceptable while combined position does not.

Praxisbeispiele

• Use true position to review hole patterns before committing rework on a precision plate.
• Compare measured center drift with the active datum before moving offsets on a multi-feature part.

Häufige Fehler / Fehlersuche

• If holes fail true position unexpectedly, verify both datum lock and hole-center measurement method before reworking parts.
• If correction makes one feature better but another worse, check whether the active datum or pattern origin is wrong.

Verwandte Tools

• True Position Calculator
• Gdt Reference